All public logs

Combined display of all available logs of Phidgets Support. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 22:44, 15 November 2024 Mparadis talk contribs created page Template:DCBLDCMotor SurgeCurrentLimit (Created page with "Surge Current Limit is an advanced feature on new Phidget motor controllers. It allows you to safely exceed your Current Limit for a limited time (approximately one second, intelligently determined by your controller), allowing for faster acceleration from your motor than would otherwise be possible. For applications where faster acceleration is desirable, we recommend setting your Surge Current Limit equal to the stall current of your motor. For all...")
• 22:44, 15 November 2024 Mparadis talk contribs created page Template:DCMotor CurrentLimit (Created page with "Current limiting is an advanced, yet easy-to-use feature that intelligently monitors and controls the current through your motor. This will help to keep your system safe in a variety of situations. {{hiddenh4|Determining Your Current Limit}} The datasheet of your {{#switch: {{{1}}}|bldc=BLDC motor| dc =DC motor| #default =motor}} will specify the following parameters: * Rated Current * Stall Current We recommend setting your Current Limit to '''1.1x''' the rated curren...")
• 22:43, 15 November 2024 Mparadis talk contribs created page Template:DCMotor Deadband (Created page with "{{#switch: {{{1}}} | position = Phidget Position Controllers run a sophisticated proportional-integral-derivative (PID) controller on board. The DeadBand refers to an area around your Target Position (Target Position ± DeadBand) where control of the motor is relaxed. A small error can lead to the motor continually ''hunting'' for a target causing unwanted effects. A non-zero DeadBand can prevent this behavior. The motor will become disengaged o...")
• 22:43, 15 November 2024 Mparadis talk contribs created page Template:DCMotor TuningConstants (Created page with "{{#switch: {{{1}}} | position = Phidget Position Controllers run a sophisticated proportional-integral-derivative (PID) controller on board. Kp, Ki, and Kd are tuning constants that must be derived for each application. For more information, view our guide on tuning your Position Controller here. | velocity = Phidget Velocity Controllers run a sophisticated proportional-integral-derivative (PID) controller on board. Kp, Ki, and Kd...")
• 22:42, 15 November 2024 Mparadis talk contribs created page Template:DCMotor Acceleration (Created page with "Acceleration controls how quickly your controller can change the motor’s velocity. {{hiddenh4|Example}} {| class="wikitable" style="margin:auto;width:75%;text-align: center;" ! style="text-align: center;" | Acceleration<br>(rotations/s²) ! style="text-align: center;" | Initial Velocity<br>(rotations/s) ! style="text-align: center;" | Velocity Limit<br>(rotations/s) ! style="text-align: center;" | Time to Reach Velocity Limit |- | style="text-align: center;" | 0.1 ||...")
• 22:42, 15 November 2024 Mparadis talk contribs created page Template:DCMotor RescaleExamples (Created page with "Generally, most users will prefer units of degrees or rotations. To determine an appropriate Rescale Factor, you will need to know the following values: *Encoder pulses per revolution, equivalent to 4x the counts per revolution (CPR) *Gearbox ratio (if applicable) These values will be available from manufacturer data sheets, or directly on the motors/encoders. {{hiddenh5|Converting to Degrees}} Specifications of system: *Motor gear ratio: 76:1 *Encoder quadrature cycle...")
• 22:38, 15 November 2024 Mparadis talk contribs created page Template:DCMotor RescaleFactor (Created page with "{{#switch: {{{1}}} | position = The Rescale Factor allows you to change the units of the following properties: * Target Position, Position, Expected Position, Deadband * VelocityLimit, Acceleration | velocity = The Rescale Factor allows you to change the units of the following properties: * Target Velocity, Velocity, Expected Velocity, Deadband * Acceleration | #default = Unexpected error. }} By default, the units will be in encoder pulses which is dictated by your e...")
• 22:38, 15 November 2024 Mparadis talk contribs created page Template:DCMotor Engage (Created page with "{{#switch: {{{1}}} | position = Your Position Controller will not attempt to control the position of your motor until it is engaged. | velocity = Your Velocity Controller will not attempt to control the velocity of your motor until it is engaged. | #default = Your controller will not attempt control of your motor until it is engaged. }} When disengaged, the controller will stop powering to your motor, it will instead be in a freewheel state.")
• 22:37, 15 November 2024 Mparadis talk contribs created page Template:DCMotor DutyCycle (Created page with "The most recent Duty Cycle value reported by the controller. Phidget motor controllers uses a pulse-width modulated (PWM) signal to modify the average voltage across your motor. The table below shows the result of different Duty Cycle values when using a 24-volt power supply. {| class="wikitable" style="margin:auto;width:75%;text-align: center;" ! style="text-align: center;" | Duty Cycle ! style="text-align: center;" | Result |- | style="text-align: center;" | 0.0 |...")
• 22:33, 15 November 2024 Mparadis talk contribs created page Template:DCMotor RescaleFactorNote (Created page with "You can use the Rescale Factor to modify the base units of this property.")
• 22:32, 15 November 2024 Mparadis talk contribs created page File:Positioncontroller sandbox tempimage.PNG
• 22:32, 15 November 2024 Mparadis talk contribs uploaded File:Positioncontroller sandbox tempimage.PNG
• 22:31, 15 November 2024 Mparadis talk contribs created page File:Positioncontroller BLDC Encoder.png
• 22:31, 15 November 2024 Mparadis talk contribs uploaded File:Positioncontroller BLDC Encoder.png
• 22:31, 15 November 2024 Mparadis talk contribs created page File:DCC1020 0 PositionController.png
• 22:31, 15 November 2024 Mparadis talk contribs uploaded File:DCC1020 0 PositionController.png
• 22:31, 15 November 2024 Mparadis talk contribs created page File:DCC1020 0 Panel PositionController.png
• 22:31, 15 November 2024 Mparadis talk contribs uploaded File:DCC1020 0 Panel PositionController.png
• 22:31, 15 November 2024 Mparadis talk contribs created page File:DCC1100 0.jpg
• 22:31, 15 November 2024 Mparadis talk contribs uploaded File:DCC1100 0.jpg
• 22:30, 15 November 2024 Mparadis talk contribs created page File:DCC1002 0.jpg
• 22:30, 15 November 2024 Mparadis talk contribs uploaded File:DCC1002 0.jpg
• 22:30, 15 November 2024 Mparadis talk contribs created page File:DCC1001 0.jpg
• 22:30, 15 November 2024 Mparadis talk contribs uploaded File:DCC1001 0.jpg
• 22:30, 15 November 2024 Mparadis talk contribs created page File:DCC1000 0.jpg
• 22:30, 15 November 2024 Mparadis talk contribs uploaded File:DCC1000 0.jpg
• 22:29, 15 November 2024 Mparadis talk contribs created page File:DCC1120 0.png
• 22:29, 15 November 2024 Mparadis talk contribs uploaded File:DCC1120 0.png
• 22:29, 15 November 2024 Mparadis talk contribs created page File:DCC1020.png
• 22:29, 15 November 2024 Mparadis talk contribs uploaded File:DCC1020.png
• 22:20, 15 November 2024 Mparadis talk contribs created page MotorPositionController API Guide (Created page with "{{#seo:|description=Get started with your Position Controller}} Category:IntroGuide <div class="nonumtoc"> <div class="toclimit-4"> =Introduction= thumb|<center>The [https://wwwdev.int.phidgets.com/?prodid=1333 30V 50A DC Motor Phidget (DCC1020_0)] will be used throughout this guide.</center> This guide will provide information about the MotorPositionController API to get you up and running with your new Phidget motor controller. Before start...")
• 20:13, 15 November 2024 Mparadis talk contribs created page File:DCC1120 ControlPanel VoltageExample.png
• 20:13, 15 November 2024 Mparadis talk contribs uploaded File:DCC1120 ControlPanel VoltageExample.png
• 20:13, 15 November 2024 Mparadis talk contribs created page File:DCC1120 ControlPanel TemperatureExample.png
• 20:13, 15 November 2024 Mparadis talk contribs uploaded File:DCC1120 ControlPanel TemperatureExample.png
• 20:12, 15 November 2024 Mparadis talk contribs created page File:DCC1120 ControlPanel CurrentExample.png
• 20:12, 15 November 2024 Mparadis talk contribs uploaded File:DCC1120 ControlPanel CurrentExample.png
• 20:12, 15 November 2024 Mparadis talk contribs created page File:DCC1120 ControlPanel EncoderExample.png
• 20:12, 15 November 2024 Mparadis talk contribs uploaded File:DCC1120 ControlPanel EncoderExample.png
• 20:12, 15 November 2024 Mparadis talk contribs created page File:DCC1120 ControlPanel VelocityControllerExample.png
• 20:12, 15 November 2024 Mparadis talk contribs uploaded File:DCC1120 ControlPanel VelocityControllerExample.png
• 20:12, 15 November 2024 Mparadis talk contribs created page File:DCC1120 ControlPanel PositionControllerExample.png
• 20:12, 15 November 2024 Mparadis talk contribs uploaded File:DCC1120 ControlPanel PositionControllerExample.png
• 20:11, 15 November 2024 Mparadis talk contribs created page File:DCC1120 ControlPanel BLDCMotorExample.png
• 20:11, 15 November 2024 Mparadis talk contribs uploaded File:DCC1120 ControlPanel BLDCMotorExample.png
• 20:11, 15 November 2024 Mparadis talk contribs created page File:DCC1120 0 Panel.png
• 20:11, 15 November 2024 Mparadis talk contribs uploaded File:DCC1120 0 Panel.png
• 20:11, 15 November 2024 Mparadis talk contribs created page File:DCC1120 Wiring.jpg
• 20:11, 15 November 2024 Mparadis talk contribs uploaded File:DCC1120 Wiring.jpg
• 20:04, 15 November 2024 Mparadis talk contribs created page DCC1120 Quick Start Guide (Created page with "__NOINDEX__ __NOTOC__ {{#seo:|description=Get started with your BLDC Motor Phidget}} ==Part 1: Setup== {{PT1 Deck Sequence}} ==Part 2: Using Your Phidget== ===Connections Overview=== link=|center {| | '''VINT Port''' || This device must be connected to a [https://www.phidgets.com/?tier=2&catid=64&pcid=57 VINT Hub Phidget] to function. |- | '''Hall Effect''' || The hall effect position feedback from the motor is needed for the controller to...")