Phidgets Forums

Hi,

I am using a PhidgetInterfaceKit 8/8/8 ( ID: 1018_2B ) to read data from Sharp infrared distance sensors

• Sharp Distance Sensor (4-30cm) ID: 3520_0
• Sharp Distance Sensor (10-80cm) ID: 3521_0
• Sharp Distance Sensor (20-150cm) ID: 3522_0

via IR Distance Adapters ( ID: 1101_0 ).


Could I also read this data with other boards like the

• VINT Hub Phidget ( HUB0000_0 ) optional with 8x Voltage Input Phidget ( ID: DAQ1000_0 )
• PhidgetTextLCD 20X2 : White : Integrated PhidgetInterfaceKit 8/8/8 ( ID: 1203_2B )
• PhidgetSBC3 ( ID: 1073_0 )
• PhidgetSBC4 ( ID: SBC3003_0 )
• PhidgetInterfaceKit 8/8/8 ( ID: 1018_2B )
• PhidgetInterfaceKit 8/8/8 w/6 Port Hub ( ID: 1019_1B )
• PhidgetInterfaceKit 2/2/2 ( ID: 1011_0 )

without to change my code ?


Best
Greetings
Timo

HUB0000 requires phidget22, and setting isHubPortDevice to true. SBCs would require an addServer call because you are opening over the network. The others would require no changes at all.

-Patrick