This controller can deliver up to 50A of continuous current and 75A of peak current to a single brushless DC motor.

This controller can deliver up to 50A of continuous current and 75A of peak current to a single DC motor.

This 30V 50A power guard protects your system from power surges caused by motors.

This VINT Hub has six high-speed VINT ports and is ideal for new Phidget systems.

This VINT Hub has a single high-speed VINT port and is great for systems with limited space.

This spatial board has a 3-axis accelerometer, gyroscope and compass with high resolution readings at low magnitudes.

Measure soil moisture to bring some automation to your next gardening project.

Control position, velocity, and acceleration of 16 RC servos with just one VINT port.

This controller can deliver up to 4A of continuous current per phase to a single bipolar stepper motor.

Write text and draw pictures to this 128x64px graphic LCD display that connects to a VINT port.

Measure acceleration up to ±8g in each axis with the PhidgetAccelerometer. Connects via USB or VINT.

This board has 4 SPDT mechanical relays rated at 210W for DC or 1750VA for AC.

Control 8 DPDT mechanical relays, switching up to 250VAC/2amp or 200VDC/2amp.

This RFID interface can read and write low-frequency RFID tags.

An accelerometer, gyroscope, and magnetometer all in one board. Measuring in 3 axes, it plugs right into your VINT hub.

This encoder interface can measure 250,000 quadrature cycles per second at 1000 Hz.

This RTD interface has a maximum data rate of 3 Hz.

Measure the DC current running through a wire with this convenient clip-on sensor.

This 130 mm load cell is ideal for medium-sized scales and platforms. C4-grade load cells have greater accuracy.

This 130 mm load cell is ideal for medium-sized scales and platforms. Dual mounting holes allow for secure installation.

This 130 mm load cell is ideal for medium-sized scales and platforms. C4-grade load cells have greater accuracy.

This 130 mm load cell is ideal for medium-sized scales and platforms. C4-grade load cells have greater accuracy.

This kit makes it easy to attach a Phidget-compatible connector to your sensor.

This 130 mm load cell is ideal for medium-sized scales and platforms. C4-grade load cells have greater accuracy.

This 150 mm load cell is ideal for larger scales and platforms. Dual mounting holes allow for secure installation.

This 150 mm load cell is ideal for larger scales and platforms. Dual mounting holes allow for secure installation.

This 50kg load cell measures tensile forces (e.g. hanging loads).

This fuse socket provides a quick and easy way to add a Maxi fuse to your high-power system.

This optical hollow shaft encoder connects directly to a Phidgets Encoder Interface.

This 100kg load cell measures tensile forces (e.g. hanging loads).

This 200kg load cell measures tensile forces (e.g. hanging loads).

This stainless steel probe type thermocouple is easy to install and plugs into a Phidgets thermocouple board.

This optical rotary encoder connects directly to a Phidgets Encoder Interface.

This 500kg load cell measures tensile forces (e.g. hanging loads).

This compact wireless adapter will enable your SBC4 to connect to your home wi-fi network.

This wireless antenna will enable your SBC4 to connect to your home wi-fi network.

Two 30A 63V Maxi fuses for use with Phidget motor controller systems.

Two 50A 63V Maxi fuses for use with Phidget motor controller systems.

This 1000kg load cell measures tensile forces (e.g. hanging loads).